December 2014 - devel - libdivecomputer.org

[PATCH 1/2] Cochran: removed unneeded serial configuration and commands.
by John Van Ostrand 07 Dec '14

07 Dec '14

The Cochran serial configuration and commands duplicated what Analyst did when communicating with the DC. These are unneeded and were removed. Signed-off-by: John Van Ostrand <john(a)vanostrand.com> --- src/cochran_commander.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/src/cochran_commander.c b/src/cochran_commander.c index 5f7b8f3..dc9b3d5 100644 --- a/src/cochran_commander.c +++ b/src/cochran_commander.c @@ -82,7 +82,6 @@ cochran_packet (cochran_device_t *device, dc_event_progress_t *progress, if (high_speed) { serial_sleep(device->port, 45); - // Weird but I only get the right result when I do it twice // Rates are odd, like 825600 for the EMC, 115200 for commander rc = serial_configure(device->port, device->data.conf.high_baud, 8, SERIAL_PARITY_NONE, 2, SERIAL_FLOWCONTROL_NONE); @@ -91,14 +90,6 @@ cochran_packet (cochran_device_t *device, dc_event_progress_t *progress, free (device); return DC_STATUS_IO; } - - rc = serial_configure(device->port, device->data.conf.high_baud, 8, - SERIAL_PARITY_NONE, 2, SERIAL_FLOWCONTROL_NONE); - if (rc == -1) { - ERROR (abstract->context, "Failed to set the high baud rate."); - free (device); - return DC_STATUS_IO; - } } // Receive the answer from the device. @@ -146,14 +137,8 @@ cochran_commander_serial_setup (cochran_device_t *device, dc_context_t *context) serial_set_queue_size(device->port, 4096, 4096); // Make sure everything is in a sane state. - // Mimicing Analyst software with excessive flushes serial_flush (device->port, SERIAL_QUEUE_OUTPUT); serial_flush (device->port, SERIAL_QUEUE_INPUT); - serial_flush (device->port, SERIAL_QUEUE_INPUT); - serial_flush (device->port, SERIAL_QUEUE_INPUT); - serial_flush (device->port, SERIAL_QUEUE_INPUT); - serial_flush (device->port, SERIAL_QUEUE_INPUT); - serial_flush (device->port, SERIAL_QUEUE_INPUT); serial_set_break(device->port, 1); serial_sleep(device->port, 16); -- 1.9.3

1 1

C# and libdivecomputer
by libdivecomputer＠henrik.synth.no 01 Dec '14

01 Dec '14

loicmichel wrote: > > Dear Anton Lundin, > > I'm used to program in C# and have zaro experience with C. > > Are you aware of any c# code to link to the libdivecomputer ? > > I can't figure out from the example how to download and use data from > a VEO2 computer. > > Thanks for help, > There's a libdivecomputer DLL here: http://www.libdivecomputer.org/builds/divinglog/ Maybe that's useful? Cheers, Henrik

4 9

Roadmap for the v0.5 release
by Jef Driesen 01 Dec '14

01 Dec '14

Hi, I originally planned to release version 0.5 around the end of September. Looks like I've been a bit optimistic there. Anyway, instead of committing on a new deadline, I'll just give an overview of all the things that are in the pipeline. First of all, there are 4 completely new backends in development: * Suunto EON steel (done) * Citizen Hyper Aqualand (done) * Cochran Commander and EMC * Divesystem Orca and iDive There are also a few other new features being worked on: * Firmware updater for the HW OSTC3 and OSTC Sport * A more modular example application * Regular bugfixes here and there So these are the things I would like to finish first. There has been some discussion about a string based api, but I would like to postpone that after the v0.5 release. I might already consider adding a string based variant of the devinfo event (for the serial number and firmware version), but that will depend on how well everything else on my todo list goes. Jef

1 0