Le 22/06/2015 19:54, Stan a écrit :

Le 17/06/2015 21:57, Anton Lundin a écrit :

...

On 17 June, 2015 - stan.speleo@notgmail.fr wrote:

...

Le 17.06.2015 13:42, Anton Lundin a écrit :

...

On 17 June, 2015 - stan.speleo@notgmail.fr wrote:

...

Hi,

I am trying to use the libdivecomputer lib in order to GET and SET the INTERNALS (INTERVAL, THRESHOLD, ENDCOUNT, AVERAGING) of the Reefnet Sensus Ultra logger. On Linux. I have not found any software on linux which can manage this task.

I have as well another less important question : how to get a csv data for the dives ? This would be great because the only software I could find, "Subsurface", gives the data in an xml format, which I have to parse in order to proceed it by myself.

Subsurface can export your profile into csv too. I'm currently not at a sane computer so i can't tell you exactly how, but the functionality is there.

Othervise you could write your own tool which uses libdivecomputer for the download and emits the information in whatever format you like.

//Anton

Thanks a lot !

You answered to me instead of the mailing-list, is it by choice ? Or should I forward to the dev list ?

To: stan.speleo@notgmail.fr Subject: Re: [Reefnet Sensus Ultra] help for a beginner Cc: devel@libdivecomputer.org

And it ended up in the archives to: http://libdivecomputer.org/pipermail/devel/2015-June/000729.html

So, it went to the list as well.

...

That answers half of my problem, and that's already great :-) The other part, which is (I think) not supported by Subsurface, is to SET and GET the INTERNALS. I would be very happy to get some hints in order to do it by myself with libdivecomputer.

I have no clue how that protocoll works, but I've added support for configuring a bunch of other computers from subsurface, and i might take a look at the Reefnet stuff.

Othervise you might be able to add it yourself. Relevant bits in subsurface source can be found in: configuredivecomputer.cpp configuredivecomputerthreads.cpp qt-ui/configuredivecomputerdialog.cpp qt-ui/configuredivecomputerdialog.ui

//Anton

Thanks Anton for your help.

I have "git-cloned" the libdivecomputer project, then configure, make, make install.

I tried a minimum working program which opens the Reefnet Sensus Ultra, but it seems I have some problem linking my programme with the libdivecomputer "*.o" files.

Do you have any advice to help me writing a makefile in order to link those files together ?

Stanislas

Update : it compiles ! \o/ Well know, I am trying to make it read/write... to be continued...

Stanislas

On 22 June, 2015 - Stan wrote:

Le 22/06/2015 20:18, Stan a écrit :

...

Le 22/06/2015 19:54, Stan a écrit :

...

Le 17/06/2015 21:57, Anton Lundin a écrit :

...

On 17 June, 2015 - stan.speleo@notgmail.fr wrote:

...

Le 17.06.2015 13:42, Anton Lundin a écrit :

...

On 17 June, 2015 - stan.speleo@notgmail.fr wrote:

>Hi, > >I am trying to use the libdivecomputer lib in order to GET and >SET the >INTERNALS (INTERVAL, THRESHOLD, ENDCOUNT, AVERAGING) of the Reefnet >Sensus >Ultra logger. >On Linux. >I have not found any software on linux which can manage this task. > >I have as well another less important question : how to get a >csv data >for >the dives ? This would be great because the only software I >could find, >"Subsurface", gives the data in an xml format, which I have to >parse in >order to proceed it by myself. > Subsurface can export your profile into csv too. I'm currently not at a sane computer so i can't tell you exactly how, but the functionality is there.

Othervise you could write your own tool which uses libdivecomputer for the download and emits the information in whatever format you like.

//Anton

Thanks a lot !

You answered to me instead of the mailing-list, is it by choice ? Or should I forward to the dev list ?

To: stan.speleo@notgmail.fr Subject: Re: [Reefnet Sensus Ultra] help for a beginner Cc: devel@libdivecomputer.org

And it ended up in the archives to: http://libdivecomputer.org/pipermail/devel/2015-June/000729.html

So, it went to the list as well.

...

That answers half of my problem, and that's already great :-) The other part, which is (I think) not supported by Subsurface, is to SET and GET the INTERNALS. I would be very happy to get some hints in order to do it by myself with libdivecomputer.

I have no clue how that protocoll works, but I've added support for configuring a bunch of other computers from subsurface, and i might take a look at the Reefnet stuff.

Othervise you might be able to add it yourself. Relevant bits in subsurface source can be found in: configuredivecomputer.cpp configuredivecomputerthreads.cpp qt-ui/configuredivecomputerdialog.cpp qt-ui/configuredivecomputerdialog.ui

//Anton

Thanks Anton for your help.

I have "git-cloned" the libdivecomputer project, then configure, make, make install.

I tried a minimum working program which opens the Reefnet Sensus Ultra, but it seems I have some problem linking my programme with the libdivecomputer "*.o" files.

Do you have any advice to help me writing a makefile in order to link those files together ?

Stanislas

Update : it compiles ! \o/ Well. Now, I am trying to make it read/write... to be continued...

Stanislas

I am now trying to figure out what parameters should I give to the fuction "dc_status_t reefnet_sensusultra_extract_dives (dc_device_t *device, const unsigned char data[], unsigned int size, dc_dive_callback_t callback, void *userdata);" ??

"device" is obvious. I guess that data[] is the returned dives. But what about "size", "callback" and "userdata" ??

The data block is the raw data from the device, and callback is the callback thats gets called for each dive, with the optional userdata as argument.

I'd suggest you use the higher level api, dc_device_open, dc_device_foreach, dc_device_close to download the dives from the logger.

//Anton