[PATCH 12/14] Cleanup: consistently check return value of iostream functions
Dirk Hohndel
dirk at hohndel.org
Wed Jan 3 11:35:15 PST 2018
Coverity CID 215197
Coverity CID 215200
Signed-off-by: Dirk Hohndel <dirk at hohndel.org>
---
src/citizen_aqualand.c | 12 ++++++++++--
src/hw_ostc.c | 14 ++++++++++++--
src/oceanic_atom2.c | 12 ++++++++++--
src/oceanic_vtpro.c | 10 +++++++---
src/reefnet_sensuspro.c | 12 ++++++++++--
src/suunto_d9.c | 12 ++++++++++--
src/suunto_solution.c | 6 +++++-
src/suunto_vyper.c | 12 ++++++++++--
src/suunto_vyper2.c | 24 ++++++++++++++++++++----
9 files changed, 94 insertions(+), 20 deletions(-)
diff --git a/src/citizen_aqualand.c b/src/citizen_aqualand.c
index f639efdd9566..7510000b49fc 100644
--- a/src/citizen_aqualand.c
+++ b/src/citizen_aqualand.c
@@ -155,7 +155,11 @@ citizen_aqualand_device_dump (dc_device_t *abstract, dc_buffer_t *buffer)
// Erase the current contents of the buffer
dc_buffer_clear (buffer);
- dc_iostream_set_dtr (device->iostream, 1);
+ status = dc_iostream_set_dtr (device->iostream, 1);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to set the DTR line.");
+ return status;
+ }
// Send the init byte.
const unsigned char init[] = {0x7F};
@@ -200,7 +204,11 @@ citizen_aqualand_device_dump (dc_device_t *abstract, dc_buffer_t *buffer)
break;
}
- dc_iostream_set_dtr (device->iostream, 0);
+ status = dc_iostream_set_dtr (device->iostream, 0);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to clear the DTR line.");
+ return status;
+ }
return DC_STATUS_SUCCESS;
}
diff --git a/src/hw_ostc.c b/src/hw_ostc.c
index ed81fdf293df..05d511850e47 100644
--- a/src/hw_ostc.c
+++ b/src/hw_ostc.c
@@ -902,7 +902,12 @@ hw_ostc_device_fwupdate (dc_device_t *abstract, const char *filename)
// bootloader needs to be send repeatedly, until the response packet is
// received. Thus the time between each two attempts is directly controlled
// by the timeout value.
- dc_iostream_set_timeout (device->iostream, 300);
+ rc = dc_iostream_set_timeout (device->iostream, 300);
+ if (rc != DC_STATUS_SUCCESS) {
+ ERROR (context, "Failed to set the timeout.");
+ free (firmware);
+ return rc;
+ }
// Setup the bootloader.
const unsigned int baudrates[] = {19200, 115200};
@@ -928,7 +933,12 @@ hw_ostc_device_fwupdate (dc_device_t *abstract, const char *filename)
}
// Increase the timeout again.
- dc_iostream_set_timeout (device->iostream, 1000);
+ rc = dc_iostream_set_timeout (device->iostream, 1000);
+ if (rc != DC_STATUS_SUCCESS) {
+ ERROR (context, "Failed to set the timeout.");
+ free (firmware);
+ return rc;
+ }
// Enable progress notifications.
dc_event_progress_t progress = EVENT_PROGRESS_INITIALIZER;
diff --git a/src/oceanic_atom2.c b/src/oceanic_atom2.c
index 77c8e9d54fdd..77b946ae44bf 100644
--- a/src/oceanic_atom2.c
+++ b/src/oceanic_atom2.c
@@ -630,8 +630,16 @@ oceanic_atom2_device_open (dc_device_t **out, dc_context_t *context, const char
dc_iostream_sleep (device->iostream, 100);
// Set the DTR/RTS lines.
- dc_iostream_set_dtr(device->iostream, 1);
- dc_iostream_set_rts(device->iostream, 1);
+ status = dc_iostream_set_dtr(device->iostream, 1);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (context, "Failed to set the DTR line.");
+ return status;
+ }
+ status = dc_iostream_set_rts(device->iostream, 1);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (context, "Failed to set the DTR line.");
+ return status;
+ }
// Make sure everything is in a sane state.
dc_iostream_purge (device->iostream, DC_DIRECTION_ALL);
diff --git a/src/oceanic_vtpro.c b/src/oceanic_vtpro.c
index cdb8943930b7..1ae4d4a79f04 100644
--- a/src/oceanic_vtpro.c
+++ b/src/oceanic_vtpro.c
@@ -269,9 +269,13 @@ oceanic_vtpro_calibrate (oceanic_vtpro_device_t *device)
// device needs approximately 6 seconds to respond.
unsigned char answer[2] = {0};
unsigned char command[2] = {0x18, 0x00};
- dc_iostream_set_timeout (device->iostream, 9000);
- dc_status_t rc = oceanic_vtpro_transfer (device, command, sizeof (command), answer, sizeof (answer));
- dc_iostream_set_timeout (device->iostream, 3000);
+ dc_status_t rc = dc_iostream_set_timeout (device->iostream, 9000);
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+ rc = oceanic_vtpro_transfer (device, command, sizeof (command), answer, sizeof (answer));
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+ rc = dc_iostream_set_timeout (device->iostream, 3000);
if (rc != DC_STATUS_SUCCESS)
return rc;
diff --git a/src/reefnet_sensuspro.c b/src/reefnet_sensuspro.c
index 88c165028f12..2aee3ec40b29 100644
--- a/src/reefnet_sensuspro.c
+++ b/src/reefnet_sensuspro.c
@@ -182,7 +182,11 @@ reefnet_sensuspro_handshake (reefnet_sensuspro_device_t *device)
dc_device_t *abstract = (dc_device_t *) device;
// Assert a break condition.
- dc_iostream_set_break (device->iostream, 1);
+ status = dc_iostream_set_break (device->iostream, 1);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to set break.");
+ return status;
+ }
// Receive the handshake from the dive computer.
unsigned char handshake[SZ_HANDSHAKE + 2] = {0};
@@ -193,7 +197,11 @@ reefnet_sensuspro_handshake (reefnet_sensuspro_device_t *device)
}
// Clear the break condition again.
- dc_iostream_set_break (device->iostream, 0);
+ status = dc_iostream_set_break (device->iostream, 0);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to clear break.");
+ return status;
+ }
// Verify the checksum of the handshake packet.
unsigned short crc = array_uint16_le (handshake + SZ_HANDSHAKE);
diff --git a/src/suunto_d9.c b/src/suunto_d9.c
index 2c92a49c2a76..8c2834c8c799 100644
--- a/src/suunto_d9.c
+++ b/src/suunto_d9.c
@@ -240,7 +240,11 @@ suunto_d9_device_packet (dc_device_t *abstract, const unsigned char command[], u
return DC_STATUS_CANCELLED;
// Clear RTS to send the command.
- dc_iostream_set_rts (device->iostream, 0);
+ status = dc_iostream_set_rts (device->iostream, 0);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to clear RTS.");
+ return status;
+ }
// Send the command to the dive computer.
status = dc_iostream_write (device->iostream, command, csize, NULL);
@@ -265,7 +269,11 @@ suunto_d9_device_packet (dc_device_t *abstract, const unsigned char command[], u
}
// Set RTS to receive the reply.
- dc_iostream_set_rts (device->iostream, 1);
+ status = dc_iostream_set_rts (device->iostream, 1);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to set RTS.");
+ return status;
+ }
// Receive the answer of the dive computer.
status = dc_iostream_read (device->iostream, answer, asize, NULL);
diff --git a/src/suunto_solution.c b/src/suunto_solution.c
index bbeaf8e90132..7242eed5f2cf 100644
--- a/src/suunto_solution.c
+++ b/src/suunto_solution.c
@@ -162,7 +162,11 @@ suunto_solution_device_dump (dc_device_t *abstract, dc_buffer_t *buffer)
unsigned char answer[3] = {0};
// Assert DTR
- dc_iostream_set_dtr (device->iostream, 1);
+ status = dc_iostream_set_dtr(device->iostream, 1);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to set the DTR line.");
+ return status;
+ }
// Send: 0xFF
command[0] = 0xFF;
diff --git a/src/suunto_vyper.c b/src/suunto_vyper.c
index 586a01716dfd..c82226b7ee91 100644
--- a/src/suunto_vyper.c
+++ b/src/suunto_vyper.c
@@ -178,7 +178,11 @@ suunto_vyper_send (suunto_vyper_device_t *device, const unsigned char command[],
dc_iostream_sleep (device->iostream, 500);
// Set RTS to send the command.
- dc_iostream_set_rts (device->iostream, 1);
+ status = dc_iostream_set_rts (device->iostream, 1);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to set RTS.");
+ return status;
+ }
// Send the command to the dive computer.
status = dc_iostream_write (device->iostream, command, csize, NULL);
@@ -202,7 +206,11 @@ suunto_vyper_send (suunto_vyper_device_t *device, const unsigned char command[],
dc_iostream_purge (device->iostream, DC_DIRECTION_INPUT);
// Clear RTS to receive the reply.
- dc_iostream_set_rts (device->iostream, 0);
+ status = dc_iostream_set_rts (device->iostream, 0);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to clear RTS.");
+ return status;
+ }
return DC_STATUS_SUCCESS;
}
diff --git a/src/suunto_vyper2.c b/src/suunto_vyper2.c
index 6ddd3d7a7f42..25918784d2ee 100644
--- a/src/suunto_vyper2.c
+++ b/src/suunto_vyper2.c
@@ -127,10 +127,18 @@ suunto_vyper2_device_open (dc_device_t **out, dc_context_t *context, const char
dc_iostream_sleep (device->iostream, 100);
// Make sure everything is in a sane state.
- dc_iostream_purge (device->iostream, DC_DIRECTION_ALL);
+ status = dc_iostream_purge (device->iostream, DC_DIRECTION_ALL);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (context, "Failed to reset IO state.");
+ goto error_close;
+ }
// Enable half-duplex emulation.
- dc_iostream_set_halfduplex (device->iostream, 1);
+ status = dc_iostream_set_halfduplex (device->iostream, 1);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (context, "Failed to set half duplex.");
+ goto error_close;
+ }
// Read the version info.
status = suunto_common2_device_version ((dc_device_t *) device, device->base.version, sizeof (device->base.version));
@@ -187,7 +195,11 @@ suunto_vyper2_device_packet (dc_device_t *abstract, const unsigned char command[
dc_iostream_sleep (device->iostream, 600);
// Set RTS to send the command.
- dc_iostream_set_rts (device->iostream, 1);
+ status = dc_iostream_set_rts (device->iostream, 1);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to set the RTS line.");
+ return status;
+ }
// Send the command to the dive computer.
status = dc_iostream_write (device->iostream, command, csize, NULL);
@@ -197,7 +209,11 @@ suunto_vyper2_device_packet (dc_device_t *abstract, const unsigned char command[
}
// Clear RTS to receive the reply.
- dc_iostream_set_rts (device->iostream, 0);
+ status = dc_iostream_set_rts (device->iostream, 0);
+ if (status != DC_STATUS_SUCCESS) {
+ ERROR (abstract->context, "Failed to set the RTS line.");
+ return status;
+ }
// Receive the answer of the dive computer.
status = dc_iostream_read (device->iostream, answer, asize, NULL);
--
2.15.1
More information about the devel
mailing list