[Reefnet Sensus Ultra] help for a beginner

[Stanislas]

Le 26/06/2015 10:15, Jef Driesen a écrit :
>> On 2015-06-17 13:12, stan.speleo at notgmail.fr wrote:
>>> I am trying to use the libdivecomputer lib in order to GET and SET the
>>> INTERNALS (INTERVAL, THRESHOLD, ENDCOUNT, AVERAGING) of the Reefnet
>>> Sensus Ultra logger.
>>> On Linux.
>>> I have not found any software on linux which can manage this task.
>>
>> The parameters can be changed with the 
>> reefnet_sensusultra_device_write_parameter() function. The current 
>> values are automatically downloaded during the handshake with the 
>> device. The application receives the handshake packet through the 
>> DC_EVENT_VENDOR event. So the easiest way to get the current values 
>> is to call the reefnet_sensusultra_device_sense() function. You can 
>> use any other function that gets data from the device, but "sense" is 
>> the fastest if you're only interested in the handshake packet.
>>
>>> I have as well another less important question : how to get a csv data
>>> for the dives ? This would be great because the only software I could
>>> find, "Subsurface", gives the data in an xml format, which I have to
>>> parse in order to proceed it by myself.
>>
>> Anton already answered this question.
>>
>> Jef

Le 26/06/2015 19:51, Stan a écrit :
> Thanks Jef for those hints. That's going to help.
>
> Stanislas 

That works fine ! I can now read and write the internal parameters.
Thanks again, to both of you, for your help :-)

Stanislas